Siemens HiPath 1130 - Chapter 1, “Important Information”; Chapter 2, “System Data”; Chapter 7, “Configuring the System; Chapter 8, “Feature Access Codes”

Table of the System’s Programming Codes
Configuring the System Specifically for the Client For internal distribution only
A31003-K1250-S100-12-7619
7-8 HiPath 1100, Service Manual
CD Interface
Assignment
(for System Tele-
phones)
46 Interface:
HiPath 1120: 01 to 04
HiPath 1130/1150: 01 to 08
HiPath 1190: 01 to 24
or
∗ - To delete
Extension # instead of
extension
HiPath1120/
1130/1150:
1st - 11,
2nd - 12, etc
HiPath 1190:
1st - 101
Extension Coeffi-
cient
48 Analog extension Line Type (Brazil):
1 - 900 ohms
2 - 600 ohms
3 - 900 ohms
4 - 600 ohms
# instead of
extension
1 - Default
extension
Activating External
Message Waiting
Indicator
014
∗ - To enable
# - To disable
Automatic # - To disable
External MWI Group 015 extensionor
∗ - To delete
# instead of
extension
None
Message Waiting
server number
065 MSN number (up to 20
digits)
# instead of
number
None
Internal Voice Mail
Interface
016 UCD Subscriber Group or
∗ - To delete
Automatic None
Collect Call Barring
by extension
93 Extension
∗ - To enable
# - To disable
# instead of
extension
# - To disable
Type of equipment
connected to the
extension
003 Extension 0 - Normal
1 - Fax
2 - DID
3 - Music Module
# instead of
extension
0 - Normal
Auto-Answering
Mode
034 Extension
∗ - To enable
# - To disable
# instead of
extension
# - To disable
Billing alert for
analog extension
041 Analog extension ∗ - To enable
# - To disable
# instead of
extension
# - To disable
Timer for outgoing
external calls
047 Extension Call duration: 0000 to 9999
seconds
# instead of
extension
180 seconds
Activate/Deactivate
timer for outgoing
external calls
048 Extension
∗ - To enable
# - To disable
Automatic # - To disable
Second Attendant
for MSN
082 Index: 001 to 140 (00 to 99) in 5-second cycles Automatic 06 (30
seconds)
Modem extension 085 Extension Automatic None
MSN and extension
assignment
086 Extension
+
1 - Day
2 - Night
Index: 001 to 140 Automatic None
Table 7-6 Programming an Extension
Programmed
Functions
Cod
e
Intermediate Data Data to be
Programmed
Completing
Data Entry
Default