EasyManua.ls Logo

Siemens HiPath 1130 - ADSL Module; Figure 3-20 ADSL Module Hipath 1120

Siemens HiPath 1130
251 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Modules (MO)
Modules For internal distribution only
A31003-K1250-S100-12-7619
3-34 HiPath 1100, Service Manual
3.6.3 ADSL Module
Introduction
With this module you can create a small LAN network for home, office or other uses.
This module is designed for use on the HiPath 1100 based on ADSL (Asymmetric Dig-
ital Subscriber Line) technology. It is possible, therefore, to receive high-speed data
and voice (up to 8 Mbit/s) through a single pair on a standard telephone line (POTS).
Functions
ASDL modem with Full ADSL (8 Mbps downstream and 1 Mbps upstream - ITU
G.922,1) and ADSL G2.Lite (1.5 Mbps downstream and 512 kbps upstream - ITU
G2.922,2, ANSI T1.413-1998 Standard) capability.
4 10/100 Base-T standard HUB ports with four ports for building a small LAN.
Module with built-in microfilter to separate voice and data signals.
Interfaces
The V.24 serial interface module cannot be used if the system has an ADSL Module
installed.
Figure 3-20 ADSL Module HiPath 1120

Table of Contents

Other manuals for Siemens HiPath 1130

Related product manuals