Siemens HiPath 1130 - Figure 6-1 ISDN Configuration Options

Starting the Programming Mod
e
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
6-5
For internal distribution only Operation
Procedure:
1. Check whether the HiPath 1100 system is turned on and the computer has re-
started.
2. Insert the system CD in the CD drive
If Auto-Run is not configured, go to the Start menu on Windows, click Run and
then select the Browse button in the dialog box. Open the file SETUP.EXE on the
CD drive.
3. In the Setup window, select the language you want to use
4. Click “Install.“
A window will appear where you can select the software to be installed
5. Install your selected software components sequentially. For programming the Hi-
Path 1100 system, the following applications must be installed:
● HiPath 1100 Manager E
Figure 6-1 ISDN Configuration Options
NTBA
CAPI
Driver
Manager
Billing
Software Up-
Status Monitor
Transmission
ISDN
Card
CommServer
HiPath
1100
S
0
1
ext.
S
0
2
int.
C/D
HiPath 1100 Applications
Digital/Analog
S
0
ISDN
ISDN S
0
Configura-
tion Options