Starting the Programming Mode
Operation For internal distribution only
A31003-K1250-S100-12-7619
6-4 HiPath 1100, Service Manual
Basic Requirement:
● IBM PC, Pentium 333 MHz processor (minimum)
● 128 MB RAM (minimum)
● Microsoft Windows 98 SE, Windows 2000, Windows ME, Windows NT 4.0 (Ser-
vice Pack 3) or Windows XP
● SVGA Color Monitor, 800x600 resolution (minimum)
● Free disk space: 150 MB (minimum).
Installation:
The system may be programmed using a computer by selecting one of the following
options:
S
0
Module
For this option, only the HiPath 1100 applications are installed. After restarting the
computer configure the settings on the CommServer.
Computer <--> HiPath 1100 Connection
Page
With an S
0
Module
page 6-4
With a V.24 Serial Interface page 6-6
With an ADSL Module page 6-7
With an Analog Modem page 6-8
With an USB Interface: Without using online services page 6-
12
With an USB interface: Using online services page 6-
13
To Next Page
Loading...
