Installation of Expansion and Option Module
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
4-27
For internal distribution only Installation
Installation Diagram
8. Insert the CPU into the system.
9. Move the module latch back to secure module.
10. Connect the Main Distribution Frame’s cables.
11. Reassemble the entire set.
12. “Performing a Visual Inspection” on page 4-48.
13. Turn on the power supply.
14. Configure the required data (see “Operation” on page 6-1).
Figure 4-22 Installing a Fax/DID Module on the HiPath 1190/1190R
Step Procedure
To Next Page
Loading...
