Comments about the System’s Programming Code
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
7-23
For internal distribution only Configuring the System Specifically for the Client
Permission List (24)
There are 3 Permission Lists that are available for dialing from any extensions in the
category “Outward-Restricted Trunk Access”. List 1 allows you to store 4 numbers;
list 2, up to 10 numbers; and list 3 up to 25 numbers.
Permission for using Speed Dial numbers without COS analysis (072)
This code allows users of a class with no designated permission to make external
calls using the Speed Dialing Phonebook.
COS assignment (11)
There are up to 8 access categories for accessing external lines that can be assigned
to extensions:
● No Trunk Access (No Permission) - For making internal calls and answering ex-
ternal calls;
● Outward-Restricted Trunk Access - For receiving internal and external calls, and
for answering and receiving transferred calls. However, it does not have normal
access to make external calls, except for calls dialed directly from the Phone-
book or from Permission Lists.
● Restricted Trunk Access (with Denied List) - For receiving internal and external
calls and for making external calls to any number that is not included in the De-
nied List.
● Unrestricted Trunk Access - Can make any type of call.
COS Changeover (78)
This code allows extensions to use a feature for temporarily changing over the Class
of Service. Therefore, it is possible to allow or deny an extension to transfer tempo-
rarily its Class of Service to another telephone.
Language (64)
Defines the language for displaying messages on the system telephone display.
To change a released number enter its Phonebook entry number then the new num-
ber.
An extension may be assigned two different categories, one for Day and one for
Night Service.
To Next Page
Loading...
