Comments about the System’s Programming Codes
Configuring the System Specifically for the Client For internal distribution only
A31003-K1250-S100-12-7619
7-32 HiPath 1100, Service Manual
Extension Coefficient (48)
This function couples the impedances of the system and the extension line to which
it is connected.
Collect Call Barring by extension (93)
When collect call barring is activated, all collect calls are automatically rejected by the
system.
Type of Equipment Connected to an Extension (003)
This setting specifies the type of equipment that is connected to a selected exten-
sion slot.
Auto-Answering Mode (034)
This setting specifies the use of the Auto-Answering Mode for the telephone by us-
ing a feature code (see Functions used for Making Calls - Speakerphone Auto-An-
swering Mode in the User Manual).
Billing alert for analog extension (041)
This setting allows you to transmit billing pulses to an analog extension.
Timer for outgoing external calls (047)
This setting specifies a maximum time for the duration of an outgoing external call for
each extension.
A5/B5 ⇒ C5/D5
A6/B6 ⇒ C6/D6
A7/B7 ⇒ C7/D7
A8/B8 ⇒ C8/D8
If a call has been answered at least once by the system, Collect Call Barring cancels
the blocking.
When an incoming call over a digital line is forwarded for not being answered (*14)
and Collect Call Barring is activated, the call will ring at the first DID for the external
line.
Please refer to the documentation provided with the telephone set connected to the
extension to find out if a billing indication is supported and which transmission mode
is used.
Table 7-21 CD Interface Assignment
HiPath 1120 HiPath1130/1150/1190
To Next Page
Loading...
