Comments about the System’s Programming Code
A31003-K1250-S100-12-7619
HiPath 1100, Service Manual
7-43
For internal distribution only Configuring the System Specifically for the Client
● External line used (Ln)
Note: Example of the (Ln) field content for ticketing:
● Extension (Ext)
Some specific types of access will be displayed in this field, indicated by the follow-
ing numbers:
● COS Changeover (WCOS)
● Ring duration
● Call duration
● Dialed Number (Number)
The system allows you to configure a confidentiality feature for the number di-
aled at the time the CDR record is issued. This is done by replacing the symbol
“?” with the last four digits dialed.
● Type of call (I):
– 1 = Incoming call
– 2 = Outgoing call
– 5 = Transferred incoming call
– 6 = Transferred outgoing call
– 7 = 3-way conference with incoming
– 8 = 3-way conference with outgoing call
– * = Incoming call not answered yet = incoming call
● Impulses (Call fees) with a TME1 Module installed.
● Cost Code (Account code).
External Line (Ln) Field
801 00
802 01
Access (Ext) Field
Sensor - Outgoing call 9101
Data Link - Outgoing or incoming data call for system administration 9201
DISA - Incoming call 9301
Fax/DID - Incoming call 9401
To Next Page
Loading...
