Option Modules (MO)
Modules For internal distribution only
A31003-K1250-S100-12-7619
3-36 HiPath 1100, Service Manual
● HiPath 1120 - CND version
Interfaces
ADSL Module Connector Assignments
Note: Connect the X2 connector slot 2 to a HiPath 1120 external analog line input us-
ing the cable included with the module.
Figure 3-21 ADSL Module HiPath 1120 - CND
Table 3-25 ADSL Module Connector Assignments HiPath 1120 - CND
Contact X1 Connector X2 Connector J3 Con-
nector
J5 Con-
nector
J6 Con-
nector
J7 Con-
nector
1 Connection to
the MB is
through a pin
connector
ADSL input RJ45 con-
nector
HUB
RJ45 con-
nector
HUB
RJ45 con-
nector
HUB
RJ45 con-
nector
HUB
2
External analog
line output
To Next Page
Loading...
