Siemens SINAMICS G120C DP

• MRP: Media redundancy, impulsed with 200ms. Precondition: Ring topology
With MRP, you get an uninterrupted switchover if you set the failure monitoring time to a
value > 200ms.
• MRPD: Media redundancy, bumpless. Precondition: IRT and the ring topology created in the
control
• Diagnostic alarms in accordance with the error classes speci󹪝ed in the PROFIdrive pro󹪝le.
• Device replacement without removable data storage medium: The replacement converter is
assigned the device name from the IO controller, not from its memory card or from the
programming device.
• Shared Device for converters that support PROFIsafe.
The converter as Ethernet node
1$
4*/".*$4
(%
4*/".*$4
(%
4*/".*$4(
4*/".*$4($
4*/".*$4(9
&UIFSOFU
Figure4-45 The converter as Ethernet node (examples)
Further information on the operation as Ethernet nodes can be found in the Function Manual
"Fieldbuses".
Overview of the manuals (Page465)
Further information on PROFINET
Further information on PROFINET can be found on the Internet:
• PROFINET – the Ethernet standard for automation (http://w3.siemens.com/mcms/
automation/en/industrial-communications/pro󹪝net/Pages/Default.aspx)
• PROFINET system description (https://support.industry.siemens.com/cs/ww/en/view/
19292127)
Installing
4.10Connecting the interfaces for the converter control
SINAMICS G120C Converters
110 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK