Installing
4
4.1 Installing the label for the North American market
Description
Figure4-1 Adhesive label with danger and warning notes for North America
The converter is supplied with an adhesive label with danger and warning notes for the
North American market.
Attach the adhesive label in the required language to the inside of the control cabinet where
it is clearly visible at all times.
4.2 EMC-compliant setup of the machine or plant
The converter is designed for operation in industrial environments where strong
electromagnetic elds are to be expected.
Reliable and disturbance-free operation is only ensured for EMC-compliant installation.
To achieve this, subdivide the control cabinet and the machine or system into EMC zones:
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 39
To Next Page
Loading...
