Siemens SINAMICS G120C DP

5.8.7 Why can a parameter value not be changed?
Overview
Whether or not a parameter value can be changed depends on the type of parameter and the
operating mode of the converter.
Function description
The converter indicates why it currently does not permit a parameter to be changed:
Read parameters cannot
be adjusted
V
2.
The parameter can only
be adjusted during quick
commissioning.
V
99
2.
A parameter can only be
adjusted when the motor
is switched o󹪜
V
99
2.
Further information
For each parameter, the parameter list contains the operating state in which the parameter can
be changed.
Commissioning
5.8Handling the BOP 2 operator panel
SINAMICS G120C Converters
164 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK