Siemens SINAMICS G120C DP User Manual

Appendix
A
A.1 New and extended functions
A.1.1 Firmware version 4.7 SP14
Table A-1 New functions and function changes in 󹪝rmware4.7 SP14
 Function SINAMICS
  G120 G120D
 
*'
*&
&83
&8%
&8(
&86
&8'
&8'
1 The G115D converter now supports the extended safety function 'Safety Limited
Speed (SLS)' when using motors from SIEMENS and third-party manufacturers.
✓ - - - ✓ - ✓ -
A.1.2 Firmware version 4.7 SP13
Table A-2 New functions and function changes in 󹪝rmware4.7 SP13
 Function SINAMICS
   G120 G120D
 
*'
*0
*&
&83
&8%
&8(
&86
&8'
&8'
1 SIMOTICS 1FP1 and 1FP3 synchronous-reluctance motors have also been
approved for operation with SINAMICS G120C.
- ✓ ✓ ✓ ✓ ✓ - ✓ -
2 The extended safety functions SS1, SLS, SSM and SDI are approved when
using synchronous-reluctance motors from Siemens and third-party manu‐
facturers.
- - - - - ✓ - ✓ -
3 The converter transmits the state of the fail-safe digital input F-DI 0 via
PROFIsafe when using the basic functions.
You can 󹪝nd more information in the "Safety Integrated" Function Manual.
"Safety Integrated" function manual (https://
support.industry.siemens.com/cs/ww/en/view/109751320)
✓ ✓ ✓ - - ✓ ✓ ✓ ✓
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 449

Siemens SINAMICS G120C DP Specifications

General

Protection Rating	IP20
Frequency Range	0 to 650 Hz
Control Modes	V/f, sensorless vector control
Communication Interfaces	PROFIBUS DP
Ambient Temperature	-10 to +50 °C (without derating), -10 to +60 °C (with derating)
Overload Capacity	150 % rated current for 60 s, 200 % rated current for 3 s
Storage Temperature	-40 to +70 °C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Output Voltage	0 V to Supply Voltage