Siemens SINAMICS G120C DP

You have transferred the settings to the converter.
❒
10.2.1.5 Download from IOP-2 operator panel
Overview
You can transfer the converter settings that are backed up on the IOP-2 operator panel back into
the converter.
Precondition
The following requirements apply:
• The converter power supply has been switched on.
• The converter settings are not protected against copying.
Download with active know-how protection with copy protection (Page401)
Function description
Procedure
1. Connect the operator panel to the converter.
2. Start the download.
8S'RZQORDG
0HQX
3DUDPHWHUV6HWXS'LDJQRVWLFV
8S
'RZQORDG
([WUDV6XSSRUW
'RZQORDGSDQHOWRGULYH
8SORDGGULYHWRSDQHO
'HOHWHSDQHOSDUDPHWHUVHW
'ULYHWRPHPRU\FDUG
0HPRU\FDUGWRGULYH
5HQDPHSDUDPHWHUVHW
3. Wait until the download is completed.
Corrective maintenance
10.2Downloading the converter settings
SINAMICS G120C Converters
386 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK