Siemens SINAMICS G120C DP User Manual

A.1.10 Firmware version 4.5
Table A-10 New functions and function changes in Firmware4.5
 Function SINAMICS
 G120 G120D
 
*&
&83
&8%
&8(
&8'
&8'
1 Support for the new Power Modules:
• PM230 IP20 FSA … FSF
• PM230 in a push-through FSA … FSC
- ✓ ✓ ✓ - -
2 Support for the new Power Modules:
• PM240-2 IP20 FSA
• PM240-2 in push-through FSA
- ✓ ✓ ✓ - -
3 New Control Units with PROFINET support ✓ ✓ - ✓ ✓ ✓
4 Support of the PROFIenergy pro󹪝le ✓ ✓ - ✓ ✓ ✓
5 Shared device support via PROFINET ✓ ✓ - ✓ ✓ ✓
6 Write protection ✓ ✓ ✓ ✓ ✓ ✓
7 Know-how protection ✓ ✓ ✓ ✓ ✓ ✓
8 Adding a second command data set (CDS0 → CDS0 … CDS1)
(All other converters have four command data sets)
✓ - - - - -
9 Position control and basic positioner - - - - - ✓
10 Support of an HTL encoder - - - - ✓ ✓
11 Support of an SSI encoder - - - - - ✓
12 Failsafe digital output - - - - ✓ ✓
A.2 Interconnecting signals in the converter
A.2.1 Fundamentals
The following functions are implemented in the converter:
• Open-loop and closed-loop control functions
• Communication functions
• Diagnosis and operating functions
Every function comprises one or several blocks that are interconnected with one another.
Appendix
A.2Interconnecting signals in the converter
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 461

Siemens SINAMICS G120C DP Specifications

General

Protection Rating	IP20
Frequency Range	0 to 650 Hz
Control Modes	V/f, sensorless vector control
Communication Interfaces	PROFIBUS DP
Ambient Temperature	-10 to +50 °C (without derating), -10 to +60 °C (with derating)
Overload Capacity	150 % rated current for 60 s, 200 % rated current for 3 s
Storage Temperature	-40 to +70 °C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Output Voltage	0 V to Supply Voltage