Siemens SINAMICS G120C DP

5.8.6 Entering the parameter value directly
Overview
The BOP‑2 o󹪜ers the option of setting the parameter value digit by digit.
Precondition
You are in the menu for displaying and changing parameter values.
The parameter value 󹪞ashes in the BOP-2 display.
Function description
Procedure
1. Press the OK button until the 󹪝rst digit of the parameter value 󹪞ashes.
V
2.
2. Change the parameter value digit-by-digit.
2.2.
You set the parameter value directly.
❒
Commissioning
5.8Handling the BOP 2 operator panel
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 163