Siemens SINAMICS G120C DP User Manual

10.3 PROFINET device name
Overview
Converters with PROFINET interface support "Device replacement without removable data
storage medium".
Requirement
The topology of the PROFINET IO system with the IO device involved is con󹪝gured in the higher-
level control system.
Function description
The converter can be replaced without having to insert a removable data storage medium (e.g.
a memory card) with the saved device names in the converter – or having to reassign the device
names using a PG.
Further information
Details of the device replacement without removable storage medium can be found on the
Internet:
PROFINET system description (http://support.automation.siemens.com/WW/view/en/
19292127)
10.4 Spare parts
10.4.1 Overview
Spare part Article number
5 I/O terminal sets, 1 front
door set and 1 blanking cov‐
er for the operator panel
Frame size AA …
FramesizeC
6SL3200-0SK41-0AA0
1 set of small parts for in‐
stallation
Frame size D …
framesizeF
6SL3200-0SK08-0AA0
Corrective maintenance
10.4Spare parts
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 403

Siemens SINAMICS G120C DP Specifications

General

Protection Rating	IP20
Frequency Range	0 to 650 Hz
Control Modes	V/f, sensorless vector control
Communication Interfaces	PROFIBUS DP
Ambient Temperature	-10 to +50 °C (without derating), -10 to +60 °C (with derating)
Overload Capacity	150 % rated current for 60 s, 200 % rated current for 3 s
Storage Temperature	-40 to +70 °C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Output Voltage	0 V to Supply Voltage