Siemens SINAMICS G120C DP

Procedure
Procedure
To transfer OpenOSS license terms to a PC, proceed as follows:
1. Switch o󹪜 the converter power supply.
2. Insert an empty memory card into the card slot of the converter.
Overview of the interfaces (Page82)
3. Switch on the converter power supply.
4. The converter writes 󹪝le "Read_OSS.ZIP" to the memory card within approximately
30seconds.
5. Switch o󹪜 the converter power supply.
6. Withdraw the memory card from the converter.
7. Insert the memory card into the card reader of a PC.
8. Please read the license terms.
3.4 Scope of delivery converters FSAA ... FSC
The delivery comprises at least the following components:
• A ready to run converter with loaded 󹪝rmware.
Options for upgrading and downgrading the 󹪝rmware can be found on the Internet:
Firmware (http://support.automation.siemens.com/WW/news/en/67364620)
You can 󹪝nd the article number 6SL3210-1KE…, the hardware version (e.g. C02) and the
󹪝rmware (e.g. V4.7) on the converter rating plate.
• 1 set of terminal strips for connecting the inputs and outputs
• 1 set of shield plates, including mounting materials
• Compact Operating Instructions in German and English
• The converter contains open-source software (OSS). The OSS license terms are saved in the
converter.
• 1 set of connectors for connecting the line supply, motor and braking resistor
• Only for converters with 󹪝eldbus via USS or Modbus RTU: 1 connector for connecting the
󹪝eldbus
Description
3.4Scope of delivery converters FSAA ... FSC
SINAMICS G120C Converters
28 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK