Parameter Description Factory setting
r0053[0...11] CO/BO: Status word 2 -
.00 1 signal: DC braking active
.02 1 signal: Speed > minimum speed (p1080)
.06 1 signal: Speed ≥ setpoint speed (r1119)
You can nd additional binector outputs in the parameter list.
Overview of the manuals (Page465)
Advanced commissioning
8.4Adapt the default setting of the terminal strip
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 193
To Next Page
Loading...
