Siemens SINAMICS G120C DP

Parameter
Parameter Description Factory setting
r0025 CO: Output voltage, smoothed - Vrms
r0066 CO: Output frequency - Hz
r0071 Output voltage, maximum - Vrms
p0304[M] Rated motor voltage 0Vrms
p0310[M] Rated motor frequency 0Hz
p1300[D] Open-loop/closed-loop control operating mode 0
p1333[D] U/f control FCC starting frequency 0Hz
p1334[D] U/f control slip compensation starting frequency 0Hz
p1335[D] Slip compensation scaling 0%
p1338[D] U/f mode resonance damping gain 0
Advanced commissioning
8.20Motor control
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 303