Siemens SINAMICS G120C DP User Manual

Parameter
Parameters of the fault bu󹪜er and the fault history
Parameter Description Factory setting
r0945[0…63] Fault code -
r0948[0…63] Fault time received in milliseconds - ms
r0949[0…63] Fault value -
p0952 Fault cases counter 0
r2109[0…63] Fault time removed in milliseconds - ms
r2130[0…63] Fault time received in days -
r2131 Actual fault code -
r2133[0…63] Fault value for 󹪞oat values -
r2136[0…63] Fault time removed in days -
Extended settings for faults
Parameter Description Factory setting
p2100[0…19] Changing the fault reaction, fault number 0
p2101[0…19] Changing the fault reaction, reaction 0
p2118[0…19] Change message type, message number 0
p2119[0…19] Change message type, type 1
p2126[0…19] Changing the acknowledge mode, fault number 0
p2127[0…19] Changing the acknowledge mode 1
You will 󹪝nd details in function diagram 8075 and in the parameter description of the List
Manual.
Alarms, faults and system messages
9.4Faults, alarm bu󹪜er and alarm history
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 371

Siemens SINAMICS G120C DP Specifications

General

Protection Rating	IP20
Frequency Range	0 to 650 Hz
Control Modes	V/f, sensorless vector control
Communication Interfaces	PROFIBUS DP
Ambient Temperature	-10 to +50 °C (without derating), -10 to +60 °C (with derating)
Overload Capacity	150 % rated current for 60 s, 200 % rated current for 3 s
Storage Temperature	-40 to +70 °C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Output Voltage	0 V to Supply Voltage