Siemens SINAMICS G120C DP

Number Cause Remedy
A50001 PROFINET con󹪝guration error A PROFINET control is attempting to establish a connection with a faulty con‐
󹪝guration telegram. Check whether "Shared Device" is activated (p8929 = 2).
A50010 PROFINET name of station invalid Correct the name of station (p8920) and activate (p8925 = 2).
A50020 PROFINET: Second control miss‐
ing
"Shared Device" is activated (p8929 = 2). However, only the connection to a
PROFINET control is present.
Further information on this topic is provided in the List Manual.
Overview of the manuals (Page465)
Alarms, faults and system messages
9.5List of alarms and faults
SINAMICS G120C Converters
378 Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK