Siemens SINAMICS G120C DP User Manual

You have removed the roof-mounted fan.
❒
Installing the roof-mounted fan
Procedure
1. Align the power supply connection of the roof-mounted fan to the connector in the
converter.
2. Carefully insert the roof-mounted fan into the converter until it engages in the converter
housing.
3. Switch on the power supply for the converter.
You have installed the roof-mounted fan.
❒
Corrective maintenance
10.4Spare parts
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK 409

Siemens SINAMICS G120C DP Specifications

General

Protection Rating	IP20
Frequency Range	0 to 650 Hz
Control Modes	V/f, sensorless vector control
Communication Interfaces	PROFIBUS DP
Ambient Temperature	-10 to +50 °C (without derating), -10 to +60 °C (with derating)
Overload Capacity	150 % rated current for 60 s, 200 % rated current for 3 s
Storage Temperature	-40 to +70 °C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V (±10%), 380 V to 480 V (±10%)
Output Voltage	0 V to Supply Voltage