Encoder system connection
10.1 Sensor Module Cabinet-Mounted SMC20
244
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
Figure 10-2 Dimension drawing of the Sensor Module Cabinet SMC20, all data in mm and (inches)
1. Tilt the component backwards slightly and attach it to the DIN rail using the hooks.
2. Swivel the component onto the DIN rail until you hear the mounting slide at the rear latc
h
i
nto position.
3. Slide the components along the mounting rail to either the left or right up to their final
position.
To Next Page
Loading...
