Siemens SINAMICS S120 Combi - Typical 24 V Current Consumption of the Components

Cabinet design and EMC
12.6 24 V DC supply
298
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
12.6.4
Typical 24 V current consumption of the components
A separate 24 V power supply must be used for the SINAMICS S120 drive group.
The following table can be used to calculate the 24 V DC power supply. The values for
typical current consumption are used as a basis for configuration.
Table 12- 3 Overview of 24 V DC current consumption
Component
Typical current consumption [A
DC
]
Controller
SINUMERIK 828D - PPU without load
SINUMERIK 828D - PPU with full load (USB, handwheel, ...)
SINUMERIK NCU 710.3 PN without load
SINUMERIK NCU 710.3 PN with full load
1,2
2,5
0,9
11,7
Sensor Modules
SMC20
without/with encoder system
0,20 / 0,355
SMC30
without/with encoder system
0,20 / 0,55
SME20
without/with encoder system
0,15 / 0,25
SME25
without/with encoder system
0,15 / 0,25
Terminal Modules
TM54F (without digital outputs, without DRIVE-CLiQ)
Per digital output/DRIVE-CLiQ
0,2
0,5
Additional system components
DMC20 (without DRIVE-CLiQ)
per DRIVE-CLiQ
0,15
0,5
DME20 (without DRIVE-CLiQ)
per DRIVE-CLiQ
0,15
0,5
S120 Combi 3 axes Power Module
16 kW / 18 A / 5 A / 5 A
1,5
16 kW / 24 A / 9 A / 9 A 1,5
20 kW / 30 A / 9 A / 9 A
1,5
S120 Combi 4 axes Power Module
10 kW / 24 A / 12 A / 12 A / 12 A
1,6
16 kW / 18 A / 9 A / 5 A / 5 A
1,6
16 kW / 24 A / 9 A / 9 A / 9 A
1,6
20 kW / 30 A / 12 A / 9 A / 9 A
1,6
DRIVE-CLiQ and brake
DRIVE-CLiQ (e.g. motors with DRIVE-CLiQ interface)
0,19
Brake (e.g. motor holding brake)
Max. 1
Single Motor Modules Booksize Compact
3 A (+1 x DRIVE–CLiQ; +1 x brake)
0,75
5 A (+1 x DRIVE–CLiQ; +1 x brake)
0,75