Siemens SINAMICS S120 Combi - X21;X22 EP Terminals

S120 Combi Power Modules
4.3 Interface description
84
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
4.3.6
X21/X22 EP terminals
Table 4- 10 X21 EP terminals - infeed
Terminal
Designation
Technical data
1
-
Reserved, do not use
2 -
3
EP +24 V (Enable Pulses)
Supply voltage: 24 V DC (20.4 ... 28.8 V)
Current consumption, typical: 4 mA at 24 V
Isolated input
4 EP M1 (Enable Pulses)
Type: Screw terminal 1 (Page 307)
Max. connectable cross-section: 1.5 mm
2
Tightening torque: 0.22 … 0.25 Nm
Table 4- 11 X22 EP terminal/temperature sensor - axes
Terminal
Designation
Technical data
1
+ Temp
Temperature sensors
1)
: KTY84–1C130 / PT1000 / PTC
/ bimetallic switch with NC contact
2
- Temp
3
EP +24 V (Enable Pulses)
Supply voltage: 24 V DC (20.4 ... 28.8 V)
Current consumption, typical: 4 mA at 24 V
Isolated input
The pulse inhibit function is only available when Safety
Integrated Basic Functions are enabled.
4 EP M1 (Enable Pulses)
Type: Screw terminal 1 (Page 307)
Max. connectable cross-section: 1.5 mm
2
Tightening torque: 0.22 … 0.25 Nm
1)
The temperature sensor type can be selected by parameter (see the SINAMICS S120/S150 List Manual).