Line-side power components
3.6 Line filters
46
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
-voltage test is conducted with alternating voltage in the system, the existi
ng line
filters must be disconnected in order to obtain accurate measurements.
Interface description
3.6.3.1
Figure 3-4 Line filter for S120 Combi
Either the upper or lower PE screw can be used for the connection. One of the screws
remains unused. "Looping-through" the protective connection to the line reactor is not
permissible.
To Next Page
Loading...
