Accessories
11.1 DRIVE-CLiQ cabinet bushing
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
283
1. Insert the DRIVE CLiQ cabinet bushing from the outside of the control cabinet through the
cutout in the control cabinet.
2. Attach the DRIVE-CLiQ cabinet bushing to the outer control cabinet panel using 2
M3
s
crews and 2 nuts. In order to ensure good electromagnetic compatibility, a go
od
el
ectrical connection must be established between the DRIVE-CLiQ cabinet gland
and
t
he cabinet panel over a large surface area.
M3 screw, tightening torque 0.8 Nm
DRIVE-CLiQ cabinet bushing
Figure 11-6 Installing the DRIVE-CLiQ cabinet bushing for cables with DRIVE-CLiQ connectors
To Next Page
Loading...
