Siemens SINAMICS S120 Combi Equipment Manual

Cabinet design and EMC
12.7 Connection system
304
SINAMICS S120 Combi
Manual, (GH9), 07/2016, 6SL3097-4AV00-0BP5
Comparison of MOTION-CONNECT power cables
MOTION-CONNECT 500 power cables are mainly suitable for permanent routing. The
MOTION-CONNECT 800PLUS power cables fulfill all high mechanical requirements for the
use in tow chains. They are resistant to cutting oils.
Table 12- 9 Comparison of the MOTION-CONNECT 500 and MOTION-CONNECT 800PLUS power cables
Power cable
MOTION-CONNECT 500
MOTION-CONNECT 800PLUS
Approvals
VDE
1)
cURus or UR/CSA
UR-CSA File No.
2)
in conformance with RoHS
Yes
UL758-CSA-C22.2-N.210.2-M90
Yes
Yes
Yes
UL758-CSA-C22.2-N.210.2-M90
Yes
Yes
Rated voltage V
0
/V in accordance with EN 50395
Supply conductors
Signal conductors
600 V / 1000 V
24 V (EN) 1000 V (UL/CSA)
600 V / 1000 V
24 V (EN) 1000 V (UL/CSA)
Test voltage, rms
Supply conductors
Signal conductors
4 kV
2 kV
4 kV
2 kV
Operating temperature at the surface
Permanently installed
Moveable
-20 … +80 °C
0 … 60 °C
-20 … +80 °C
-20 … +60 °C
Strain, max.
Permanently installed
Moveable
50 N/mm
2
20 N/mm
2
50 N/mm
2
20 N/mm
2
Smallest bending radius
Permanently installed
Moveable
5 x D
max
Approx. 18 x D
max
4 x D
max
Approx. 8 x D
max
Torsional stress
30°/m absolute
30°/m absolute
Bending operations
100000
10 million
Max. traversing speed
30 m/min Up to 300 m/min
Max. acceleration
2 m/s
2
50 m/s
2
(3 m)
insulation material
CFC/silicone-free CFC/halogen/silicone-free
IEC 60754-1 / DIN VDE 0472-815
Oil resistance
EN 60811-2-1
(mineral oil only)
EN 60811-2-1
Protective jacket
PVC PUR, HD22.10 S2
(VDE 0282, Part 10)
Flame retardant
EN 60332-1-1 to 1-3
EN 60332-1-1 to 1-3
1)
The registration number is printed on the cable jacket.
2)
The file number is printed on the cable jacket.

Siemens SINAMICS S120 Combi Specifications

General

Brand	Siemens
Model	SINAMICS S120 Combi
Category	Control Unit
Language	English