System
7-82
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Softkey
Setting the password
Three password levels are distinguished in the control system, which provide different ac-
cess rights:
S System password
S Manufacturer password
S User password
According to the access level selected, certain data can be changed.
If you do not know the password, access will be denied.
Note for the Reader
See also: SINUMERIK 802D sl “Lists”
Fig. 7-3 Entering the password
Selecting the <OK> softkey sets the password.
Use <Abort> to return to the System main screen without performing any action.
Changing the password
Set
password
Change
password
To Next Page
Loading...
