System
7-84
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0
Select the power-up mode of the NC.
Use the cursor to select the appropriate mode.
S Normal power-up
The system is restarted.
S Power-up with default data
Cold restart with the default values (restores the default condition as on delivery)
S Power-up with saved data
Cold restart with the data saved last (see “Data backup”)
The PLC can be started in the following modes:
S Restart Restart
S Overall reset Overall reset
Furthermore, it is possible to link the start with a subsequent debugging mode.
Use <OK> to RESET the control system and to carry out a restart in the mode selected.
Use <RECALL> to return without any action to the main screen.
Machine data
Any changes in the machine data have a substantial influence on the machine.
MD number Name Value Unit Effect
Fig. 7-5 Structure of a machine data line
Effective
so immediately effective
cf with confirmation
re Reset
po Power on
!
Caution
Faulty parameterization may result in destruction of the machine.
The machine data are divided into the groups described in the following.
General machine data
Open the “General machine data” window. Use the PageUp / PageDown keys to browse
forward / backward.
NC
PLC
OK
Machine
data
General
MD
To Next Page
Loading...
Need help?
General
