Diagnostics and upkeep
7.3 SINAUT diagnostics and service tool
TIM DNP3
System Manual, 06/2014, C79000-G8976-C253-03
285
F560 0113 LAN communication: A negative acknowledgment was sent.
Byte 6 of the message codes the error class (ERRCLS) and byte 7 codes the error code
(ERRCOD). For the meaning of ERRCLS and ERRCOD, see Meaning of ERRCLS and
Ethernet SDB could not be opened.
Ethernet SDB with bad block ID received.
Error listening on a socket.
Ethernet port: RFC1006 has received a packet whose length exceeds the maximum.
F560 0121 TCP/IP connection termination by partner.
F560 0123 TCP/IP send error.
TCP/IP connection number invalid.
Error receiving a CR-PDU.
Illegal access over TCP/IP.
0129
Entering state: Connection information: Ethernet port problem.
Exiting state: Connection information: Ethernet port ok.
Error in socket CONNECT job.
Error receiving a CC-PDU.
Maximum number of S7 connections exceeded.
Internal / external WAN interface: Installation of the WAN driver was aborted.
Internal / external WAN interface: WAN driver is installed.
F360 0302 Internal / external WAN interface: Connection to a subscriber established (incoming call;
subscriber number identified).
Bad organizational message from routing task.
0304
Entering state: Internal / external WAN interface: Send buffer changed over to image.
Exiting state: Internal / external WAN interface: Send buffer changed back from image.
0305
Entering state: Internal / external WAN interface: Send buffer overflow occurred.
Exiting state: Internal / external WAN interface: Send buffer overflow eliminated.
To Next Page
Loading...
