Need help?Do you have a question about the SIGLENT TECHNOLOGIES SDS1104X-E and is the answer not in the manual?
Overview of essential safety precautions to prevent injury or damage.
Covers source, mode, level, coupling, holdoff, noise rejection.
Setup and decoding for I2C, SPI, UART, CAN, LIN.
Covers voltage, time, delay, auto, all, gate, clear measurements.
Covers status, self-cal, quick-cal, language, sound.
Covers pass/fail tests and mask saving/recalling.
Covers AWG, IO set (USB/LAN/WLAN), web server, self-tests.
Steps to perform and configure Bode plots.
How to reset the oscilloscope to factory settings.
Solutions for common problems like display, signal, stability, and connectivity.
Overview of essential safety precautions to prevent injury or damage.
Covers source, mode, level, coupling, holdoff, noise rejection.
Setup and decoding for I2C, SPI, UART, CAN, LIN.
Covers voltage, time, delay, auto, all, gate, clear measurements.
Covers status, self-cal, quick-cal, language, sound.
Covers pass/fail tests and mask saving/recalling.
Covers AWG, IO set (USB/LAN/WLAN), web server, self-tests.
Steps to perform and configure Bode plots.
How to reset the oscilloscope to factory settings.
Solutions for common problems like display, signal, stability, and connectivity.
General| Bandwidth | 100 MHz |
|---|---|
| Channels | 4 |
| Sample Rate | 1 GSa/s |
| Record Length | 14 Mpts |
| Max Input Voltage | 400 V (DC + AC Peak) |
| Vertical Resolution | 8 bits |
| Display Resolution | 800 x 480 |
| Input Coupling | DC, AC, GND |
| Operating Temperature | 0 °C to +50 °C |
| Display | 7-inch TFT-LCD |
| Input Voltage Range | ±400 V |
| Waveform Capture Rate | 100, 000 wfs/s (Normal Mode), 400, 000 wfs/s (Sequence Mode) |
| Interfaces | LAN |
| Input Impedance | 1 MΩ ± 1% |
| Trigger Types | Edge, Pulse, Video, Slope, Pattern |
To Next Page
