SIGLENT TECHNOLOGIES SDS1104X-E User Manual

SDS1000X-E User Manual
136
WWW.SIGLENT.COM
All Measurement
All measurement could measure all the voltage, time and delay parameters of the current
measurement source and display the results on the screen.
Figure 80 All Parameters Measurement
Do the following steps to make all parameters measurement.
1. Press the Measure button on the front panel to enter the MEASURE function menu.
2. Press the All Measure softkey to select On.
3. Press the Source softkey to select the measure source.

SIGLENT TECHNOLOGIES SDS1104X-E Specifications

General

Brand	SIGLENT TECHNOLOGIES
Model	SDS1104X-E
Category	Test Equipment
Language	English