SIGLENT TECHNOLOGIES SDS1104X-E - Page 119

SDS1000X-E User Manual
95
WWW.SIGLENT.COM
11. Press the Parity Check softkey to set the type of parity check (Even, Odd or None).
12. Press the Stop Bit softkey to set the length of stop bit (1, 1.5 or 2 bits).
13. Press the Next Page softkey.
14. Press the Bit Order softkey to select the bit order (LSB or MSB).
15. Press the Idle Level softkey to set the idle level (LOW or HIGH).