SDS1000X-E User Manual
III
Do Not Operate in Wet Conditions.
In order to avoid short circuiting to the interior of the device or electric shock, please do not
operate in a humid environment.
Do Not Operate in an Explosive Atmosphere.
In order to avoid damages to the device or personal injuries, it is important to operate the device
away from an explosive atmosphere.
Keep Product Surfaces Clean and Dry.
To avoid the influence of dust and/or moisture in air, please keep the surface of device clean and
dry.
Handling Safety
Please handle with care during transportation to avoid damages to buttons, knob interfaces and
other parts on the panels.
Only probe assemblies which meet the manufacturer’s specifications shall be used.
When use 2X/…/10000X probe assemblies, the probe assemblies shall be insulated from the
measured circuits by double or reinforced insulation.
All probe assemblies should meet the requirements of UL 61010-031 and CAN/CSA-C22.2 No.
61010-031-07.
Not to position the equipment so that it is difficult to operate the disconnecting device (detachable
plug).
If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired
To Next Page
Loading...
Need help?
General
