SIGLENT TECHNOLOGIES SDS1104X-E User Manual

SDS1000X-E User Manual
50
WWW.SIGLENT.COM
obtained should be within quadrant I and IV, namely within (0 to π/2) or (3π/2 to 2π). If the
principal axis of the ellipse is within quadrant II and IV, the phase deviation angle obtained
should be within quadrant II and III, namely within (π/2 to π) or (π to 3π/2).
X-Y function can be used to measure the phase deviation occurred when the signal under
test passes through a circuit network. Connect the oscilloscope to the circuit to monitor the
input and output signals of the circuit.

SIGLENT TECHNOLOGIES SDS1104X-E Specifications

General

Brand	SIGLENT TECHNOLOGIES
Model	SDS1104X-E
Category	Test Equipment
Language	English