SIM5350 AT Command Set
101 Call origination request failed
102 Client rejected incoming call
103 Client rejected setup indication
104 Network ended call
105 No funds available
106 No service available
108 Full service not available
109 Maximum packet calls exceeded
301 Video connection lost
302 Video call setup failure
303 Video protocol closed after setup
304 Video protocol setup failure
305 Internal error
CS network cause
1 Unassigned/unallocated number
3 No route to destination
6 Channel unacceptable
8 Operator determined barring
16 Normal call clearing
17 User busy
18 No user responding
19 User alerting, no answer
21 Call rejected
22 Number changed
26 Non selected user clearing
27 Destination out of order
28 Invalid/incomplete number
29 Facility rejected
30 Response to Status Enquiry
31 Normal, unspecified
34 No circuit/channel available
38 Network out of order
41 Temporary failure
42 Switching equipment congestion
43 Access information discarded
44 Requested circuit/channel not available
47 Resources unavailable, unspecified
49 Quality of service unavailable
50 Requested facility not subscribed
55 Incoming calls barred within the CUG
57 Bearer capability not authorized
58 Bearer capability not available
SIM5350_ATC_V1.02 6/9/2014
143
To Next Page
Loading...
Need help?
General
