SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 104 2018-05-08
network,if module has registered to the network successfull
y,it will get an APN from base station delivering.
0 Automatic mode
.Applications(AT+CSTT and AT+SAPBR) do
not need to config APN,it will use the APN from base station
delivering.
1 Manual mode
,Applications(AT+CSTT,AT+SAPBR) need to
config APN,these APNs can get from operators.
Parameter Saving
Mode
-
Max Response
Time
-
Reference Note

If module are using in GPRS network,you must config <mode> to 1
5.2.29 AT+CRRCSTATE Query RRC State
AT+CRRCSTATE Query RRC State
Test Command
AT+CRRCSTAT
E=?
Response
+CRRCSTATE: (list of supported <n>s)
OK
Read Command
AT+CRRCSTAT
E?
Response
+CRRCSTATE: <n>,<state>
OK
Parameters
See Write Command
Write Command
AT+CRRCSTAT
E=<n>
Response
OK
If failed:
+CME ERROR: <err>
Parameters
<n> Integer type
0 Disable unsolicited result code
1 Enable unsolicited result code "+CRRCSTATE: <state>"
<state> Integer type,indicates RRC connection state
0 Idle
1 Connected
255 Other
Parameter Saving
Mode
-
Max Response
Time
-
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English