Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 11 2018-05-08
Version History
V1.00 2017-06-22 New version
V1.01 2017-09-08 5.2.22 AT+CPSI Add AT command
5.2.24 AT+CSDP Add AT command
5.2.25 AT+MCELLLOCK Add AT command
5.2.26 AT+NCELLLOCK Add AT command
5.2.27 AT+NBSC Add AT command
Charpter 7 Add IP
Charpter 9 Add HTTP
Charpter 10 Add PINGs
Charpter 13 Add GNSS
V1.02 2017-12-18 Delete ATZ,AT&F,AT&V
Modify parameter save mode and max
response time
1.7.1 Add AUTO_SAVE_REBOOT
1.7.2 Add Max response time
2.2.2 ATD Delete parameters <;>
3.2.14 AT+CREG Change description of parameters
5.2.29 AT+CRRCSTATE Add AT command
5.2.30 AT+CBANDCFG Add AT command
8.2.2 AT+CIPSTART C
hange range of parameter <n> from
0…5 to 0…7
8.2.32 AT+CIPTKA Add AT command
8.2.33 AT+CIPOPTION Add AT command
Charpter 12 Add NTP
13.3.10 AT+CGNSTST Add AT Command
V1.03 2018-05-08 3.2.17 AT+CPOL Modify parameters
3.2.24 AT+CNUM Add AT Command
5.2.1 AT+CEDRXS Modify range of < AcT-type>
To Next Page
Loading...
Need help?
General
