SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 133 2018-05-08
Command
AT+CIFSREX
+CIFSREX: <IP address>
OK
Parameter
<IP address> A string parameter which indicates the IP address assigned
from GPRS
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
Only after PDP context is activated, local IP address can be obtained by
AT+CIFSR, otherwise it will respond ERROR. To see the status use
AT+CIPSTATUS command. Status should be:
IP GPRSACT, TCP CONNECTING, UDP
CONNECTING, SERVER
LISTENING, IP STATUS,
CONNECT OK, TCP CLOSING, UDP
CLOSING, TCP CLOSED, UDP CLOSED in single-
connection mode (see
<state> parameter);
IP STATUS, IP PROCESSING in multi-connection mode (see <state>
parameter).
8.2.13 AT+CIPSTATUS Query Current Connection Status
AT+CIPSTATUS Query Current Connection Status
Test Command
AT+CIPSTATUS
=?
Response
OK
Write Command
If multi IP
connection
mode
(+CIPMUX=1)
AT+CIPSTATU
S=<n>
Response
+CIPSTATUS: <n>,<bearer>,<TCP/UDP>,<IP address>,<port>,
<client state>
OK
Parameters
See Execution Command
Execution
Command
AT+CIPSTATUS
Response
1）If in single connection mode (+CIPMUX=0)
OK
STATE: <state>
2) If in multi-connection mode (+CIPMUX=1)
OK
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English