SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 140 2018-05-08
user name>,
<password>)]
Parameters
<mode> A
numeric parameter which indicates the wireless connection
mode
1 set GPRS as wireless connection mode
<apn> A string parameter which indicates the access point name
<user name> A string parameter which indicates the user name
<password> A string parameter which indicates the password
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
8.2.21 AT+CIPSRIP Show Remote IP Address and Port When Received Data
AT+CIPSRIP Show Remote IP Address and Port When Received Data
Test Command
AT+CIPSRIP=?
Response
+CIPSRIP: (list of supported <mode>s)
OK
Parameters
See Write Command
Read Command
AT+CIPSRIP?
Response
+CIPSRIP: <mode>
OK
Parameters
See Write Command
Write Command
AT+CIPSRIP=<
mode>
Response
OK
ERROR
Parameters
<mode> A numeric parameter which shows remote IP address and port.
0 Do not show the prompt
1 Show the prompt, the format is as follows:
1) For single IP connection (+CIPMUX=0)
RECV FROM:<IP ADDRESS>:<PORT>
1) For multi IP connection (+CIPMUX=1)
+RECEIVE,<n>,<data length>,<IP ADDRESS>:<PORT>
Parameter Saving
Mode
NO_SAVE
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English