SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 80 2018-05-08
5 AT Commands Special for SIMCom
5.1 Overview
Command Description
AT+CPOWD
Power off
AT+CADC
Read ADC
AT+CFGRI Indicate RI when using URC
AT+CLTS Get local timestamp
AT+CBAND Get and set mobile operation band
AT+CNBP Set the state of the band preference
AT+CNSMOD
Show network system mode
AT+CSCLK
Configure slow clock
AT+CCID Show ICCID
AT+CDEVICE View Current Flash Device Type
AT+GSV Display product identification information
AT+SGPIO Control the GPIO
AT+SLEDS Set the timer period of net light
AT+CNETLIGHT
Close the net light or open it to shining
AT+CSGS Netlight indication of GPRS status
AT+CGPIO
Control the GPIO by PIN Index
AT+CBATCHK Set VBAT checking feature ON/OFF
AT+CNMP Preferred mode selection
AT+CMNB Preferred selection between CAT-M and NB-IoT
AT+CPSMS Power Saving Mode Setting
AT+CEDRXS
Entended-DRX Setting
AT+CPSI
Inquiring UE system information
AT+CGNAPN Get Network APN in CAT-M Or NB-IOT
AT+CSDP Service Domain Preference
AT+MCELLLOCK Lock the special CAT-M cell
AT+NCELLLOCK Lock the special NB-IOT cell
AT+NBSC
Config NB-IOT Scrambling Feature
AT+CAPNMODE
Select the mode of application configure APN
AT+CRRCSTATE Query RRC State
AT+CBANDCFG Configure CAT-M Or NB-IOT Band
AT+CNACT App Network Active
AT+CEDUMP Set whether the module reset when the module is crashed
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English