SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 54 2018-05-08
3GPP TS 27.007
[13]
3.2.19 AT+CFUN Set Phone Functionality
AT+CFUN Set Phone Functionality
Test Command
AT+CFUN=?
Response
+CFUN: (list of supported <fun>s),(list of supported <rst>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command
Read Command
AT+CFUN?
Response
+CFUN: <fun>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command
Write Command
AT+CFUN=<fun
>[,<rst>]
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<fun>
0 Minimum functionality
1 Full functionality (Default)
4 Disable phone both transmit and receive RF circuits.
5 Factory Test Mode
6 Reset
7 Offline Mode
<rst>
0 Do not
Reset the MT before setting it to <fun> power level.
1
Reset the MT before setting it to <fun> power level.
Parameter Saving
Mode
-
Max Response
Time
10s
Reference Note
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English