SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 25 2018-05-08
V.25ter
Default 10 = LF. It only supports default value.
2.2.14 ATS5 Set Command Line Editing Character
ATS5 Set Command Line Editing Character
Read Command
ATS5?
Response
<n>
OK
Parameters
See Write Command
Write Command
ATS5=<n>
Response
This parameter setting determines the character recognized by TA as a
request to delete from the c
ommand line the immediately preceding
character.
OK
ERROR
Parameters
<n> 0-8-127 Response formatting character
Parameter Saving
Mode
-
Max Response
Time
-
Reference
V.25ter
Note
Default 8 = Backspace.
2.2.15 ATS6 Pause Before Blind Dialling
ATS6 Pause Before Blind Dialling
Read Command
ATS6?
Response
<n>
OK
Write Command
ATS6=<n>
Response
OK
ERROR
Parameters
<n> 0-2-999 Time
Parameter Saving
Mode
-
Max Response
-
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English