SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 168 2018-05-08
Write Command
AT+FTPMODE
=<value>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<value> 0 Active FTP mode
1 Passive FTP mode
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
11.2.3 AT+FTPTYPE Set the Type of Data to Be Transferred
AT+FTPTYPE Set the Type of Data to Be Transferred
Test Command
AT+FTPTYPE=
?
Response
OK
Read Command
AT+FTPTYPE?
Response
+FTPTYPE: <value>
OK
Parameters
See Write Command
Write Command
AT+FTPTYPE=
<value>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<value> "A" For FTP ASCII sessions
"I" For FTP Binary sessions
Parameter Saving
Mode
NO_SAVE
Max Respons
e
Time
-
Reference Note
When this value is set to A, all the data sent by the stack
to the FTP server is
made of 7 bits characters (NVT-
ASCII: the MSB is set to 0). As a
consequence binary data containing 8 bits characters will be corrupted
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English