SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 187 2018-05-08
ERROR
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
11.2.27 AT+FTPRENAME Rename the Specified File on the Remote Machine
AT+FTPRENAME Rename the Specified File on the Remote Machine
Test Command
AT+FTRENAME
=?
Response
OK
Parameters
See Execution Command
Execution
Command
AT+FTPRENAM
E
Response
If success:
OK
+FTPRENAME: 1,0
If failed:
OK
+FTPRENAME: 1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<error> See "AT+FTPGET"
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
 The file is specified by the "AT+FTPGETNAME"
and
"AT+FTPGETPATH" commands.
 The new file name is set by "AT+FTPPUTNAME"
and
"AT+FTPPUTPATH" command.
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English