SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 209 2018-05-08
15.2.4 AT+CGNSPORT GNSS NMEA Out Port Set
AT+CGNSPORT GNSS NMEA Out Port Set
Test Command
AT+CGNSPORT
=?
Response
+CGNSPORT: (list of supported <port>)
OK
Parameters
See Write Command
Read Command
AT+CGNSPOR
T?
Response
+CGNSPORT: <port>
OK
Write Command
AT+CGNSPORT
=<port>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<port> num of the port NMEA out
3 NMEA port
4 NONE
Parameter Saving
Mode
AUTO_SAVE_REBOOT
Max Response
Time
-
Reference Note
Module must reboot to make it effect if <port> value is changed.
15.2.5 AT+CGNSCOLD GNSS Cold Start
AT+CGNSCOLD GNSS Cold Start
Test Command
AT+CGNSCOL
D=?
Response
OK
Execution
Command
AT+CGNSCOL
D
Response
If AT+CGNSXTRA=0
OK
Else if AT+CGNSXTRA=1
OK
+CGNSXTRA: <mod>
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English