SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 116 2018-05-08
 <cid> values 17 to 24 are supported from MPSS JO 1.0+ onwards.

Write command returns address provided by the network if
a
connection has been established.
6.2.5 AT+CGREG Network Registration Status
AT+CGREG Network Registration Status
Test Command
AT+CGREG=?
Response
+CGREG: (list of supported <n>s)
OK
Parameters
See Write Command
Read Command
AT+CGREG?
Response
+CGREG: <n>,<stat>[,<lac>,<ci>,<netact> [,[<Active-Time>],
[<Periodic-RAU>],[<GPRS-READY-timer>]]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
See Write Command
Write Command
AT+CGREG[=<
n>]
Response
OK
ERROR
Parameters
<n> 0 Disable network registration unsolicited result code
1 Enable network registration unsolicited result code
+CGREG: <stat>
2 Enable network registration and location information
unsolicited result code +CGREG:
<stat>[,<lac>,<ci>,<netact>]
4 Enable display gprs time and periodic RAU
<stat>
0
Not registered, MT is not currently searching an
operator to register to.
The GPRS service is disabled, the UE is
allowed to attach for GPRS if requested by the user.
1 Registered, home network.
2
Not registered, but MT is currently trying to attach or
searching an operator to register to.
The GPRS service is
enabled, but an allowable PLMN is
currently not available. The
UE will start a GPRS attach as soon as an allowable PLMN is
available.
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English