SimCom SIM7000 Series At Command Manual

Smart Machine Smart Decision
SIM7000 Series_AT Command Manual_V1.03 180 2018-05-08
Parameters
<state>
0 Idle
1 In the FTP session, including FTPGET, FTPPUT, FTPDELE
and FTPSIZE operation.
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
11.2.19 AT+FTPEXTPUT Extend Upload File
AT+FTPEXTPUT Extend Upload File
Test Command
AT+FTPEXTPUT
=?
Response
OK
Write Command
AT+FTPEXTPUT
=<mode>[,<pos>,<
len>,<timeout>]
Response
If mode is 0 or 1
OK
If mode is 2
+FTPEXTPUT: <address>,<len>
…… //Input data
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters
<mode> 0 use default FTPPUT method
1 use extend FTPPUT method
2 send data to RAM through serial port, then FTPPUT
method will get the data from RAM.
<pos> data offset address 0-300k
<len> data length 0-300k
<timeout> timeout value of serial port. 1000ms-1000000ms
<file name> File name length should less or equal 50 characters.
<err> See "AT+FTPGET"
Parameter Saving
Mode
NO_SAVE
Max Response
Time
75 seconds(In case no response is received from server)
SIMCOM COMFIDENTIAL FILE

SimCom SIM7000 Series Specifications

General

Brand	SimCom
Model	SIM7000 Series
Category	Control Unit
Language	English